Water Damage Service Restoration Minneapolis-logo

Water Damage Service Restoration Minneapolis

Education Podcasts

Water Damage Service Restoration Minneapolis podcasting is where you will certainly learn everything about Devastation Restoration. Week by 7 days listen to professionals that speak about everything related to Water Damage Restoration from the particular best techniques, advice plus other ways which are suitable for water damage difficulties.


United States


Water Damage Service Restoration Minneapolis podcasting is where you will certainly learn everything about Devastation Restoration. Week by 7 days listen to professionals that speak about everything related to Water Damage Restoration from the particular best techniques, advice plus other ways which are suitable for water damage difficulties.




Water-Damaged: Restoring A Home

You know in our experience after floods many times. People well, the floodwaters will recede and they'll just kind of clean and they think that it can get by without tearing into the walls without removing the drywall. Then a few months later gets wet odors mold growing in the walls decay and rotten wood structure. There are many potential hazards associated with a flooding event and being aware of all of those or what's so important before you tackle restoring the home, after flooded water even though you feel very desperate to quickly get back in your home and you want to restore your life it can be very very difficult to find a qualified contractor. It is so important to not delay the water cleanup process as soon as it is safe to return to the home. Begin right away and to say I'm in the capacity, you have in your own household. Do you have skills that can be used? Do you have a health condition where that would make it to where you should not be doing the cleanup and restoration work? There are many potential hazards associated with a flooding event and if that was combined with wind or any other kind of hazard that adds to it. Essentially, flood water damage is considered contaminated Blackwater and it probably has sewage in it and may have chemicals fuel pesticides a variety of things that can be dangerous on contact for the biological contaminant such as from sewage and kinds of exposures. Clean first and then disinfect but of course, you need to wear proper protection to avoid skin contact and to minimize exposure both to the disinfectant as well as to the contaminant where flooding occurs. Moisture wicks up drywall and wood and any porous material in about two or three days of wetness. You are likely to have mold remediation and is a hazard in high exposure for just about anybody but it's especially hazardous to people with asthma allergies other respiratory conditions that are suppressed immune system. So, these folks should not go anywhere and near a moldy home. I'm going to outline ten steps to a safe and effective do-it-yourself from mold remediation cleanup. One is wearing protective clothing including an n95 or better respirator to isolate the moldy area from clean areas and ventilate to the outdoors with a fan in the window. Three, remove porous molding materials because you cannot properly clean them for clean and disinfect. If needed for rising contaminated floodwaters, consider applying a bore a treatment to exposed woods that will help deter decay and as well as mold, as well. Six flush the air to get all these mold spores out of the house as much as possible. Seven, speed the drying process with humidifiers heating cooling systems and get the air dry to hasten the drying of all the materials. Eight, remain on mold alert and be alert to the scent and do visual inspections frequently to find any new growth of mold and deal with it promptly. Nine, do not restore the walls and the floors or anything that's wet until it is really dry or you could have hidden problems later and ten, consider restoring your home with flood water-resistant or flood hearty materials instead of the same kinds of materials that you had to discard. To begin with, carbon monoxide occurs from burning any fuel and most people know that it is a deadly odorless gas that you cannot detect you may not have any sign of it. Other than the symptoms that can occur and so, high-level carbon monoxide, of course, is deadly but the low level can create flu-like symptoms where you have headaches, and you just feel lousy but then when you leave the home you feel better. In that case, ventilate but be alert to the potential for the damage that could have occurred to your heating system. Radon is a radioactive gas that comes from the soil and it can build up in a home, so it's not caused by a natural hazard or water damage to your home but the restoration process and that's an opportunity at that point to install a radon mitigation system while...


Fire Restoration: Large Loss From Start To Finish

This is a major Albuquerque house fire of which happened in June of 2014 the senior associate Whilst Gary McClain took these pictures when he or she was called to be able to the scene. In order to scope the fire damage and set together a great estimate after medical personnel clear the landscape, the house is usually boarded up this specific crucial step in addition to secures the house to stop further destruction from occurrences like theft. Sometimes strength stabilization is necessary restorable contents in addition to is removed coming from your home and obtained to our storage place where every product is cleaned in addition to ozone to get rid of soot and smoke scent. Crews get started by simply removing wet debris. It's hazardous function but has to be completed and the white suits you notice workers wearing in this article are called PPEs PPEs are critical in protecting deckhands from into the ecological hazards. Smoke could get past drywall and affect the frame even when there is no visible burning regarding this. This reason, the drywall may possibly need to be removed once in addition to the frame will be exposed to minimization. Crews clean subwoofer covered areas to get rid fire and cleanup of smoke odor applying specialized chemicals cleaned out and deodorized regions of the frame usually are sealed and set up to nullify virtually any remaining odor switching the frame white-colored. As seen throughout the meantime renovation, crews get to work reframing broken areas, and anytime there is structural destruction the contractor should get yourself a permit. It can important that almost everything is done to be able to code so the restored home will certainly pass inspection. Occasionally what this means is upgrades usually are needed for more mature homes to meet brand new code standards and if the homeowner's insurance policy will not include, improve coverage there may possibly be additional costs in this residence damaged ducts plus were removed coming from the crawlspace putting new ducts inside the attic. Proven more cost-effective as compared to positioning them back in the crawlspace and freeing up some money from your owner's insurance policy coverage. To go in the direction of code upgrades or perhaps windows and electric insulation holds large smoke odor and is often damaged by water from firefighters so it has been removed and has to be replaced. Then the expert tradesmen suspend drywall and what areas like baths get a unique water-resistant sheetrock drywall seams to acquire tape and dirt and texture is usually added. Given that the drywall is finished, internal doors go in the whole house in addition to are repainted within and out and then for the final touches the cabinets floor coverings, and appliances heading, in cases like this, the rest of the house gets carpet.


Basement Water Damage Cleanup

Michelle verity restoration in Portland Oregon. Today we're going to talk about basement water damage cleanup. So there are several things involved when we come to figure out what's going on with your basement flood remediation and how to best clean it up. The first thing that we're taking into account is the source of the water where did it come from. It a sump pump that has failed is groundwater from another source and it is a water heater that has failed over time or a pipe leak. All those things go into us figuring out how to best handle the situation. Second of all if it was clean water, to begin with, but it's happened over a long period of time or it happened all at once. But it took a while for it to get noticed because it was down in the basement and we have to figure out if the water remains reasonably clean or if there's now a lot higher risk for mold and bacteria. So, the reason to get things cleaned up quickly and correctly once you notice the problem is exactly that the longer that water stays there bacteria can continue to grow. Mold can set in both of those are really dangerous for human health and safety especially if any of the homeowners or residents are immunocompromised, so it's important to get that taken care of very carefully and cautiously. Also, there's more chance of structural damage and if the water damage sits with building materials long-term, the next thing that we're paying attention to is the presence of lead-based paint. So, houses from nineteen seventy-eight and older need to be tested very carefully to make sure that none of the layers of paint are positive for lead and if so it's not a huge deal it just needs to be handled carefully and by someone who is trained and licensed to do. So, the other thing that we're looking for is the presence of asbestos. While asbestos sounds like a very old tiny thing that of course, we don't use today. It's actually still found in products at Home Depot so any age of the home. We need to test materials that often have asbestos added to it to make sure that there's none there. Actually is required now by DEQ the state of Oregon, that a lot of asbestos testing takes place for safety reasons and then also even to get it into the local dump and it has to go in with paperwork saying that's been the asbestos tested. So we will send in and a hero accredited inspector to take all the samples necessary to make sure that everything is handled very safely. So after we figured out all of the safety issues going on with the removal process, we'll then see which of the materials need to be removed and which can be dried safely, so if the water is caught really soon and it was from a clean source it's definitely possible that some of it can be dried in place depending on a material type and then also likely parts of it may need to be removed depending on what we're dealing with. So we will put up a containment plastic sheeting to keep everything safe and contained and so your house doesn't get any more messed up than it already is and we'll do the removal that needs to happen, then we will sanitize anything that is leftover. Disinfect things and get rid of any of that mold growth or bacteria that may be in place. It's very important to remove the moldy materials not just bleach them and that doesn't actually take care of the health ramifications if you just leach it, so we'll make sure that everything is removed. Then from there on out, we'll work on drying it with drying equipment and will have dehumidifiers, high-powered air movers, and air filtration devices likely depending on the scenario. We'll get everything dry and tidy and then at that point you can work on the rebuilt part of the process.


Flood Home: Make Sure Everything is Dry Before Rebuilding

It's important when you arrive into an inundated house to not repair too soon and it's very important since what can happen will be if this solid wood has not a new proper amount associated with time to be dried out. You're going to be able to be sealing upwards that water within of that tooth cavity and you are going to end up being putting plastic upon there, to keep that moisture coming from the inside to go on out and could possibly be gonna just generate a perfect spot for mold remediation to be able to grow and an individual can actually see close to this corner here and if we test this solid wood. Here is a person want to beneath fifteen % dampness content it's currently down to eleven percent and this specific homeowner did a new nice job regarding opening up this particular house and dialectic it and having that moisture in addition to that wood to be dried out, but when we look in this specific corner over here we can see whenever we test the particular moisture it's upwards of that 17%. It will be certainly upwards of twenty to twenty-three percent moisture content. In fact, you can see a tiny little bit of mold growth progress that provides appear back due to the fact that this humidity is typically the corner was having form. If I include that up together with insulation in addition to drywall that form is definitely going in order to continue to grow. Wish straight down in typically the basements and specifically what all of us need to mention whilst we're in this is several of typically the concerns that anyone looks from. As far because the reconstructing in, some of the dampness difficulties you might have any time we take our moisture meter and appearance at the moisture level of the cement wall structure, it is possible to notice it's up in forty 50 % humidity content. Therefore, when I breakthrough in this article and I actually get my framing and set it proper upwards from the wall structure just like this residence offers and I come and put insulation in between that plus put drywall about the outside regarding that. I'm trapping that moisture in behind that wall structure and I'm generating merely a perfect dwelling environment for mold growth cleanup. Mildew, the one thing to absolutely remember is regardless of if an individual rebuild and a person wants to allow it to dry out there as very much because possible. Furthermore not put untreated wood up towards that cold base wall that dampness comes through it could come from by means of the foundation which could come through inside and that will wood facing the particular wall if it's not really treated wood is actually going to form and it is going in order to be a go up. You're gonna have problems with that. So, the thing I can do is usually I could take inflexible insulation put towards that solid wall structure which doesn't have got the same humidity issues with it the best situation is to insulate on the outside.


Seven Key Steps: How to Kill Household Mold

There's no home that's immune to mold growth and while not all mold is dangerous and how can you tell for sure? That's what this video is all about and I'm going to show you the seven key steps for safely and effectively dealing with mold growth and mold remediation whenever it appears at your place. Step number one assesses the situation. Start by identifying the full extent of mold growth in the affected area and at your place. Now, this could be easy or difficult depending on your situation, as a homeowner you can deal with moldy areas less than the size of a sheet of plywood or so but larger patches or moldy areas that involve some kind of sewage back up are best left to the pros. Step number two, eliminate the moisture source. Mold only grows in the presence of moisture that's why you need to make the area permanently dry before you can expect permanent freedom from the mold. Regrowth basements are especially susceptible to water vapor infiltration through masonry walls and floors, but ventilation is not always the answer only. Ventilate basements when your door air is cooler than the air inside, your basement. Basement ventilation during hot humid weather only actually encourages mold growth. Step number three, make removal decisions of mold growth. Some moldy surfaces are ideal for treatment and restoration, but it's usually easier to remove and replace large areas of moldy drywall ceiling tiles carpet, and other nonstructural materials, where a HEPA rated respirator, while you work to protect yourself from airborne mold spores here, a simple tip even seemingly dry basements can allow enough moisture vapor to migrate up through the concrete to trigger mold growth on cardboard so never store anything organic directly on a concrete basement floor especially cardboard boxes. Step number four, dry the area. Drying out chronically moldy locations is crucial for success and air circulation heat and a dehumidifier are the three most powerful drawing tools you've got. You'll get the best results if you monitor the relative humidity of the space with a hygrometer and allowing more or less outside ventilation to speed drawing, depending on the outdoor temperature and humidity conditions. Step number five, kill mold by having cleanup and discourage regrowth. This is where the common practice of using bleach to kill mold is actually a mistake, while the toxic nature of bleach does kill mold on hard non-porous surfaces. It can't do a good job on surfaces that are even a little bit porous and that's because all molds send root-like structures called hyphae into porous surfaces to gather nutrients surface tension and prevent traditional bleach and water solutions from penetrating deeply enough into wood or concrete to kill these roots, but this is one place where the new registered fungicide technologies are better than bleach for breaking the molding cycle and the most widely available non-toxic registered product that I found so far is can chromium mold control it's a liquid that kills mold and mold spores by mechanical action physically crushing all aspects of the mold organism as it dries this mechanical action is how a non-toxic product like this can actually kill mold. It also discourages regrowth if the area occasionally becomes moist again. Step 6, eliminate mold stains. Even dead mold still looks ugly and while traditional bleach can sometimes brighten the moldy surfaces, bleach is also toxic and it often discolors surrounding areas. The best option I've found so far, for removing and remediation of old mold staining as a product called a mold stain eraser. It's an oxygen-based product that comes as a powder. Mix it with warm water, let it sit for 10 minutes then, apply the solution on two discolored surfaces up to 45 minutes. After mixing in, my tests mold stain eraser removes mold stains in many situations without changing the color of surrounding materials. The active ingredient eventually reverts back to oxygen and...


Flooded Home: Make Sure Everything is Dry Before Rebuilding Your House

It's important when you come into a flooded damage house to not rebuild too soon. It's very important because what can happen is if this wood has not had a proper amount of time to dry out and you're going to be sealing up that water inside of that cavity, and you're going to be putting plastic on there to keep that moisture from the inside to go on out, and they're going to just create a perfect place for mold removal to grow. You can actually see around this corner here and if we test this wood here, you want to below fifteen percent moisture content and it's already down to eleven percent. This homeowner did a nice job of opening up this house and airing it out and getting that moisture and that wood to dry out. But if we look in this corner over here, we can see if we test the moisture it's upwards of that 17% and there's upwards of twenty to twenty-three percent moisture content. Actually, you can see a little bit of mold growth that has come back since this moisture in the corner was holding mold. If I cover that up with insulation and drywall that mold is just going to continue to grow. We're down in the basement and what we want to talk about while we're in here is some of the issues that you look at as far as the rebuilding in, some of the moisture problems. You might have when we take our moisture meter and look at the moisture level of this concrete wall and you can actually see it's up at 40 to 50 percent moisture content. So, if I come through here and I take my framing and put it right up against the wall like this house has and I come and put insulation in between that and put drywall on the outside of that. I'm trapping that moisture in behind that wall and I'm creating just a perfect living environment for mold and mildew cleanup. The one thing to absolutely remember is no matter what if you rebuild and you want to let it dry out as much as possible and also not put untreated wood up against that cold foundation wall that moisture comes through it and could come from through the foundation that could come from inside and that wood up. Against the wall, if it's not treated wood it's going to mold restoration clean up and it's going to be a balloon and you're gonna have problems with that so, what I can do is I can take rigid insulation put against that solid wall and that doesn't have the same moisture issues with it. The ideal situation is to insulate on the outside.


Steps How To Handle Water Damage in Your Home or Business

Hi everyone, Michele Wesner from A&J Niche Services, Inc. DKI. Today I was going to speak to you about six action steps you can take when dealing with water damage to your home or business. Normal water damage caused by spring rains, flooded basement, overflowing sink, toilet tank, freezer ice maker hoses, failed water heater, or other busted or burst source pipes is entirely a messy and stressful situation. Consider these 6 action steps when dealing with water damage inside your home or business: Primary, safety first! Shut off Electricity from the Electrical Box. Before you go into an area influenced by water, switch off your electricity for the reason that area of your home. Is usually the water within the electrical sockets on the ground or walls? If you are, DO NOT FEEL! After electricity is deterred, unplug all electronics to ensure that you will avoid jolt. Number two. Stop the Water Source. Find where the water is entering into your home and try to stop or minimize the flow. If floodwater damage is occurring because of an overflowing faucet, then turning off the faucet is easy. But if you have a broken pipe, you must shut off the water to your home right away and immediately call a plumber! You may be able to clean and dry small areas affected by water damage cleanup but large areas that include carpet and pad, wood floors, linoleum, drywall, and any additional levels below the area that incurred water damage, such as a ceiling – will have to be cleaned and dried out by a professional. Number three, call A specialist Restoration Company Along with your Insurance Company. In case the area damaged by floodwater is usually large, immediately call a professional water damage and mold restoration company, such as A&J Specialty Services, Inc. DKI in the event you live or operate the Madison, ', or Southern ' area. The more quickly you call and get a restoration organization to your residence, the quicker the particular drying process could begin. While recovery technicians are in-route, your next call ought to be to your insurance policy company or insurance coverage agent. You may submit for the claim (if covered) and have your claim number looking forward to the restoration business after their appearance. Number four. Take Photos of the Ruined Area(s). Taking pictures of the injuries instantly will help you and your insurance carrier throughout the claim. When possible, take pictures of the source (where the came from), every area that was affected by the water including walls and ceilings, electronics, and any other items which you want to be documented for your insurance state (if applicable). Number five. Remove All Light or Movable Items. Remove any items or furniture that would make it easier for you or water damage restoration technicians to start cleaning. WARNING! Water causes items to become very heavy. If you are unable to move items, such as couches and chairs, leave them for the technicians to handle. Keep your safety a priority! Number six. Remove typically the Water. When seeking to remove normal flood water, use a moist vacuum, cloths, or even a mop to get rid of because of the water as possible. Repair technicians will become able to remove the flood water but virtually any immediate actions will help reduce additional problems. Taking immediate action when working with normal water at home will reduce your risk of occurring additional damages, expenses, and stress. Consider a moment and educate yourself about where your normal water shut off regulators are located, who else you should call with regard to help, and virtually any preventative measures you could proactively take. Thank you thus much for viewing this video of course, if you have any questions, comments, or perhaps ideas, please enter in them into typically the comment sections below. Also, before you leave, you should push that big red Subscribe switch to make sure to be able to subscribe to the channel so we could keep these video...


Flooded Home: The Electrical Issues

So far as the electrical products in an inundated house go it is determined by where the flooded water got to and what we can look at this has arrived, you can actually see the high-water indicate in this house. It was water damage up to right about this degree and right here, so we know anything that was below that overloaded mark and has to absolutely be replaced. You can see all the grime and garbage it was inside of that and these electric outlets are likely to have to be replaced the electrical wiring that was below this, and this will probably have to be pulled away anyplace some. Electrical wiring is gonna be able to be salvaged but we can't say for sure how significantly that water experienced wicked up through this wiring, so what's going to have to happen is you're gonna have to have a professional and certified electrician come in and replace that wiring in a flooded house. Since far as this light obviously, it was above you know light accessories that have been above the levels of floodwater and that's upwards for the electrician to determine that the process for getting the power service. Go back to a house is determined by the specific areas, you might want to check with your local electrical company to learn precisely what it is and what's proceeding to happen is you're going to go into the house and if you're willing to determine the what's been flood-damaged and that is gonna have to be substituted. The power company will disconnect power, and since we can see here the meter has recently been pulled and then you're gonna have to go in. Anything that is submerged in floodwater is going to have to be replaced and or refurbished. Here, we can see the flood water restoration has actually up here, etc this house, there's gonna be a lot of electrical work that needs to be done. All containers have to be replaced and all outlets must be replaced and most likely the wiring that is submerged is also gonna have to be replaced by a qualified electrical contractor. Some areas allow self wiring, the location where the homeowner will do the wire by themselves in order to do that, you have to have a permit that shows that you know how to achieve that properly and securely. After that, you will have a certified electrician come in and they will give you a certificate saying the house has been rewired properly. Might contact an electrical inspector to appear in and do an inspection of the home and verify that it yes, novice carried out rewired properly, and be refurbished properly. They'll contact the strength company and let them understand that it can ok to energize typically the house and typically the utility company will arrive in and switch the strength back with regard to the property. The bass speaker utility firms and floodwater conditions will actually are available in and hook upward a supplemental in discourse and provide you just at least a few stores to use in the ton cleanup process prior to they will actually come in, in addition, to attach the swimming pool house to power.


Planning Ahead: Plugging The Household Drains

My name is Carl Peterson and I'm with the AG and Biosystems Engineering department at North Dakota State University and also work with the Extension Service at NDSU, and today what I'm going to talk about is plugging drains in homes to prevent sewage backup. It's a pretty big issue when it comes to times of flooding or even in times the summer. When you get some high rains that can possibly back up sewage systems into homes and what I'm going to talk about today is what could cause it, and where it could come from. Exactly, some areas where you should look for at home where you could add some sewage cleanup backup and also some different techniques of plugging that es where that sewage backup can occur. Start with why this could possibly have? Why you could possibly have a sewage backup in your house? If the sewage treatment plant in the city or even a portion of the city is overwhelmed by water from either flooding or storms, then that could possibly backup that system and it could back up into your house. The potential for that could be sewage in your house and we can imagine why that could be problem damage to the building. It can be smell and clean up and also disease. As a potential when should we plug our drains in a house to prevent that from happening? Well, the wind should be constant, there's a couple of new things. Newer homes are built with backwater or backflow and check valves built into the older homes. We will need to have those plugged and as we go and the main thing is to prepare for that before the flooding even occurs and we'll give a couple of examples. We're here in a basement in a home and I can show you an example right over here. They have built into the home it's called a backflow backwater valve, it's built right in and on it's got a cap on it and what you need to do is to make sure to check these things periodically at least once a year, because you can have a different kind of corrosion in here. Things can get caught behind this flap and here this is the actual flap that sits in the pipe and the floodwater. The sewage from the house comes in and pushes that valve open and heads out to the sewage removal treatment plant, if water starts to back up and it backs up and hits that valve, it sits and it's stuck right there. This cap is actually what holds that valve in place, so if this cap isn't seated in place this flapper can pop right out and stay out. So, you have to make sure this is clean around it and you have to make sure that the cap is seated in there properly and make sure this cap is on correctly and you don't over tighten these because you can break the cap, but just make sure to finger tighten. Check that valve for homes that don't have these systems in it. The main thing and the best thing that you can possibly do is to prepare ahead of time because if floodwater is imminent or if a city announces it it's time to plug those drains. You don't want to be scrambling around then trying to find the right size plugs because there's going to be a lot of other people that have already picked those up and you may not have time to get to a hardware store. You want to have those plugs at the drains ready to go and here's a prime example and we've got this plug that's the right size plug for this floor. Drainpipe over here and we've already removed the scrote and the screws from this floor drain but the problem is it doesn't sit in there and it won't seat, so once I tighten it down. It still doesn't stay in that in that drain, so we needed to actually have a deeper plug for this one particular location here and that's just an example of how you want to get these plugs ahead of time and test them to make sure they'll actually fit in there and tighten them up. It sits in there and I can push it in better tighten it down to hand tighten, so it doesn't break and that seats nice and tight and that will hold that possibility for backflow up into that valve right there. Okay, here's another area where...


Preparing To Evacuate Your Home: When Flooding Is Imminent (Fuel Oil Tanks)

If floodwater damage is imminent and you have few oils heat in your home, there are several steps that you require to think about to protect your home from a heating system oil spill. A new fuel oil reservoir will typically be the basement at least in the colder parts of the country, of course, if that few natural oils was to get spilled into the basement, for that reason ton event it could float across stepping into the concrete, enter the wood, and saturate into those materials and it would be virtually unattainable that fuel olive oil out the things and that we need to look at is well. In enhance, verify that the fuel tank is anchored and if it isn't moored we need to go through some way of anchoring that tank, in place otherwise. Once the flooded water comes in it, I'll just float like a natural so if we could put point bolts into the concrete that could be preferred, but some way to anchor that tank. Another thing to perform is to try to remove as a lot of fuel oil since we can plus that typically can be carried out by the fuel oil supplier contact them and these people can come out to pump out that tank and at least nearly all that fuel to ensure that this minimizes the quantity of energy oil that may obtain spilled. If this was to get leaking, the next factor then would be to actually seal that container as much as we are able to. So the tank may have the shut-off valve simply typical to a tap valve or a few other valves where you turn that and close that away from. Also, where the particular top of the particular tank there may typically be several openings, this tank provides the one which shows the particular relative quantity of energy oil which is within the tank and after that, we have the particular pipes that provide that few natural oils in and once again we might want in order to try to close off those as much as we are able to. Cover them off so that we don't get the fuel oil dripping out of that will tank. If the basement was to get flooded with water, the fuel oil is lighter than water and so it will often drift. If we were to have water that will get into this tank, that could shift the fuel oil. The fuel essential oil would come moving out of the tank and out and around the basement. So, it is critical that people seal all of the openings that we can to prevent either that water or flood getting into the tank or the fuel oil arriving out, as I indicated the gas tank will work as cork and the anchoring of that tank is essential. Otherwise, it'll just come loose and float up and float around in your basement. So these are some steps that you really need to do if water damage is imminent and try to reduce the damage that might happen to the basement of your property.