The Automation Podcast

Shawn Tierney meets up with Gerry Abbey, Gavin Schalliol, and Kaitlin Lockridge of Copia Automation to learn about the new AI features added to DeviceLink, as well as review the new 2025 Industrial DevOps survey results and report in this episode of The Automation Podcast. For any links related to this episode, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Listen to The Automation Podcast from The Automation Blog: The Automation Podcast, Episode 249 Show Notes: Special thanks Gerry, Gavin, and Kaitlin for coming on the show, and to Copia for sponsoring this episode so we could release it "ad free!" To learn about the topics discussed in this episode, checkout the below links: Second Annual State of Industrial DevOps Report Download Copia Demo Request Streamlining Cyber Insurance and Recovery with Industrial DevOps Ransomware Ready Playbook for OT Amazon Uses Copia to Connect 1000+ PLCs across 35+ Sites Read the transcript on The Automation Blog: (automatically generated) Shawn Tierney (Host): coming soon Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

Shawn Tierney meets up with Connor Mason of Software Toolbox to learn their company, products, as well as see a demo of their products in action in this episode of The Automation Podcast. For any links related to this episode, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Listen to The Automation Podcast from The Automation Blog: The Automation Podcast, Episode 248 Show Notes: Special thanks to Software Toolbox for sponsoring this episode so we could release it "ad free!" To learn about Software Toolbox please checkout the below links: TOP Server Cogent DataHub Industries Case studies Technical blogs Read the transcript on The Automation Blog: (automatically generated) Shawn Tierney (Host): coming soon Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

Shawn Tierney meets up with Lauton Rushford of Endress+Hauser to learn about new innovations in Coriolis Flowmeter Technology in this episode of The Automation Podcast. For any links related to this episode, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Listen to The Automation Podcast from The Automation Blog: The Automation Podcast, Episode 247 Show Notes: Special thanks to Endress+Hauser for sponsoring this episode so we could release it "ad free!" To learn about Endress+Hauser, and Coriolis Flowmeters, checkout the below links: Learn more about Endress+Hauser Learn more about flowmeter products Read the transcript on The Automation Blog: (automatically generated) Shawn Tierney (Host): Welcome back to the automation podcast. Shawn Tierney here from Insights and Automation, and I wanna thank you for tuning back in. This week on the show, I meet up with Lawton Rushford from Endress and Hauser to learn all about the latest innovations in Coriolis flow meters. And I also wanna thank Endress and Hauser for sponsoring this episode so I could bring it to you completely ad free. With that said, if you're interested in learning about what's the latest in technology used in Coriolis flow meters, I think you'll enjoy this episode. I know I did. And with that, let's go ahead and jump right into this week's show. I wanna welcome to the show, Lawton from Endress and Hauser. Lawton, it's great to have you on. This is the first time you're on the show. We plus, we've had your company on before. But, Lawton, if you don't mind, could you, before we jump into Coriolis flow meters, which is an extremely important technology in our industry, could you first introduce yourself to our audience? Lauton Rushford (E+H): Yeah. Absolutely. Thank you. My name is Lawton Rushford. I am the flow product marketing manager here at Anderson Hauser, based in Greenwood, Indiana, which is about twenty minutes south of Indianapolis, Indiana at our, national headquarters, for Anderson Hauser. I've been with Anderson Hauser for seven years now, a whole bunch of different roles, but, for the last three years, I've been in this role, a flow marketing manager. Today, I I really wanted to highlight a couple of awesome innovations that we've had in Coriolis flow technology, over the last, we'll see, about year or so, because I think there's a lot of, use cases and a lot of awesome, insights we can get from from our Coriolis flow meters. And, yeah. So I guess we can we can kick it off. I did wanna highlight Anderson Hauser as the the manufacturer that I work for, and we have a history, a long history of, of innovation. And so I'm gonna kinda highlight that, initially, talk about what sort of portfolio we have currently with our Coriolis flow meters, and then talk about a couple of new cool things that that we have released over the last couple of couple of months. And then finish off with, what we call heartbeat technology. It's our advanced diagnostic system in all of our flow meters and all of our products across the board. It started with flow. So I think there's a lot of you cool use cases, and I'll I'll highlight a couple of those as well. And then, of course, Shawn is the the audience here. Anytime there's questions or anything, please feel free to to let me know, and I can I can try and address them as they come up? Shawn Tierney (Host): Sounds good. Yeah. Lauton Rushford (E+H): Awesome. Great. So I guess our first Coriolis meter that we introduced into the market was back in, 1986. So it's been some time. As you can tell by the the slide here, there's a lot of different designs of Coriolis flowmeters. There isn't one right way to do it, but I think that the way that Anderson Houser has approached innovation is is pretty pretty awesome and pretty impressive. Everything from a single tube, design to a dual tube design,

Shawn takes a look at the ET 200SP line of Distributed I/O from Siemens in Episode 19 of The Automation Show, Season 2. Listen to The Automation Show on The Automation Blog: The Automation Show, Season 2 Episode 19 Show Notes: The links mentioned in the video are listed below: ET 200SP Website ET 200SP Manual Collection Shawn's Siemens S7 Course Programming Note: Due to scheduling conflicts, episodes 17, 18, 19, and 20 are not releasing in order :-O Read the transcript on The Automation Blog: (automatically generated) Shawn Tierney (Host): coming soon Vendors: Would you like your product featured on the Podcast, Show or Blog? If you would, please contact me at: https://theautomationblog.com/contact Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

Shawn Tierney meets up with Michael Bowne of PI to learn what IO-Link is, how it works, and when to use it in this episode of The Automation Podcast. For any links related to this episode, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Video coming soon... Listen to The Automation Podcast from The Automation Blog: The Automation Podcast, Episode 246 Show Notes: To learn about our online and in-person training courses please visit TheAutomationSchool.com. Read the transcript on The Automation Blog: (automatically generated) Shawn Tierney (Host): coming soon... Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

Shawn Tierney meets up with Ashley Weckwerth of ISA to learn all about the OT Cybersecurity Summit in this episode of The Automation Podcast. For any links related to this episode, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Note: This episode was not sponsored so the video edition is a "member only" perk. The below audio edition (also available on major podcasting platforms) is available to the public and supported by ads. To learn more about our membership/supporter options and benefits, click here. Listen to The Automation Podcast from The Automation Blog: The Automation Podcast, Episode 245 Show Notes: To learn about our online and in-person training courses please visit TheAutomationSchool.com. Read the transcript on The Automation Blog: (automatically generated) Shawn Tierney (Host): Welcome back. My name is Shawn Tierney from Insights and Automation, and I wanna thank you for tuning back in to this episode of the automation podcast. This week on the show, I have Ashley Weckworth from ISA to talk about the OT cybersecurity summit they just held over in Europe in Brussels, and, very interesting conversation about OT cybersecurity. In addition to that, I had a couple announcements. First off, I wanted to let you know that I have rebooted the automation news podcast, and I renamed it Automation Tech Talk. And I'm trying to do a show at least three or four times a week at lunchtime. So if you're not already subscribed to the old automation news podcast, you should be able to find it now as Automation Tech Talk. And, I'm just trying to spend ten to twenty minutes every lunch trying to share some knowledge that I have with the community. I also wanna mention that if you are a listener, I'm running a special 20% off, sale on my courses over at the automationschool.com. You will not see that there. It's only for those listening. And I know most of you are already automation experts, so you don't need to take these courses. So, really, this would be something you would pass on to the people who work for you or people you know who need to get up to speed on whether they need an introductory PLC course, so they need to get up to speed on ControlLogix, CompactLogix, s seven twelve hundred and fifteen hundred, PanelView plus, USC, and so on. So in any case, to get that discount, that 20% off any course or bundle of courses at $99 or more, All you have to do is send me the email address of the person who wants the discount. And, of course, we do do, group enrollment with, we've done it with a lot of Fortune 500 companies. Actually, I got a new order that just came in I gotta process. But, when we do a group enrollment, you you enroll, like, several people at your shop, and then I enroll them all at once, and you get a discount a quantity discount and all that. So in any case, if you have any questions about that, just go to the automationschool.com. All my contact info is at the very top, my voice mail, my email. You can even fill in a form there or book a meeting with me. But, please let me know if you know anybody who needs training. Even if you just want me to reach out to them to see if I can help them with their training needs, please let me know over there. And with that, let's go ahead and jump into this week's episode of the automation podcast. And, Ashley, I know this is your first time on the show. So before we jump into the summary of what what what this OT cybersecurity summit is and what it was all about and the highlights and all that good stuff, before we even get into that, could you tell the audience a little bit about yourself? Ashley Weckwerth (ISA): Yeah. Thank you, Shawn. I appreciate being here. My name is Ashley Weckworth. I am located in Orlando, Florida. I've been a volunteer for ISA for twelve years now. I actually have a day job, though. I'm a volunteer with ISA,

This week Shawn Tierney hosts Michael Warren from Wieland Electric in studio to demonstrate the SAMOS PRO Safety Controller in episode 15 of The Automation Show Season 2: #Automation #IndustrialAutomation #InsightsInAutomation Watch The Automation Show: Samos Pro Safety Controller Listen to The Automation Podcast from The Automation Blog: Show Notes: Thanks to Michael for coming out to our office, and to Wieland for sponsoring this episode! For more information about the SAMOS Pro Safety Controller, see the below links: Wieland Electric Safety Products Free Download of Samos Plan6 SAMOS PRO SAFETY CONTROLLER Safety Training Wieland Electric North America Contact info Note: The video edition was originally released on 07-22-25, and re-released with Audio Podcast Edition on 08-21-25. Read the transcript on The Automation Blog: (automatically generated) ...coming soon Vendors: Would you like your product featured on the Show, Podcast, and Blog? If you would, please contact me at: https://theautomationblog.com/contact Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

Shawn Tierney meets up with Tom Weingartner of PI (Profibus Profinet International) to learn about PROFINET and System Redundancy in this episode of The Automation Podcast. For any links related to this episode, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Listen to The Automation Podcast from The Automation Blog: The Automation Podcast, Episode 244 Show Notes: Special thanks to Tom Weingartner for coming on the show, and to Siemens for sponsoring this episode so we could release it ad free on all platforms! To learn more PROFINET, see the below links: PROFINET One-Day Training Slide Deck PROFINET One-Day Training Class Dates IO-Link Workshop Dates PROFINET University Certified Network Engineer Course Read the transcript on The Automation Blog: (automatically generated) Shawn Tierney (Host): Welcome back to the automation podcast. My name is Shawn Tierney from Insights and Automation, and I wanna thank you for tuning back in this week. Now on this show, I actually had the opportunity to sit down with Thomas Weingoner from PI to learn all about PROFINET. I actually reached out to him because I had some product vendors who wanted me to cover their s two features in their products, and I thought it would be first it'd be better to actually sit down and get a refresh on what s two is. It's been five years since we've had a PROFINET expert on, so I figured now would be a good time before we start getting into how those features are used in different products. So with that said, I also wanna mention that Siemens has sponsored the episode, so it will be completely ad free. I love it when vendor sponsor the shows. Not only do we get the breakeven on the show itself, we also get to release it ad free and make the video free as well. So thank you, Siemens. If you see anybody from Siemens, thank them for sponsoring the Automation Podcast. As a matter of fact, thank any vendor who's ever sponsored any of our shows. We really appreciate them. One final PSA that I wanna throw out there is that, speaking like I talked about this yesterday on my show, Automation Tech Talk, As we've seen with the Ethernet POCs we're talking about, a lot of micro POCs that were $250 ten years ago are now $400. Right? That's a lot of inflation, right, for various reasons. Right? And so one of the things I did this summer is I took a look at my P and L, my pros profit and loss statements, and I just can't hold my prices where they are and be profitable. Right? So if I'm not breaking even, the company goes out of business, and we'll have no more episodes of the show. So how does this affect you? If you are a student over at the automation school, you have until mid September to do any upgrades or purchase any, courses at the 2020 prices. Alright? So I I don't wanna raise the prices. I've tried as long as I can, but at some point, you have to give in to what the prices are that your vendors are charging you, and you have to raise the prices. So, all my courses are buy one, sell them forever, so this does not affect anybody who's enrolled in a course. Actually, all of you folks rolled in my PLC courses, I see it updates every week now. So and those who get the ultimate bundles, you're seeing new lessons added to the new courses because you get that preorder access plus some additional stuff. So in any case but, again, I wanna reiterate, if you're a vendor who has an old balance or if you are a student who wants to buy a new course, please, make your plans in the next couple of weeks because in mid September, I do have to raise the prices. So I just wanna throw that PSA out there. I know a lot of people don't get to the end of the show. That's what I wanted to do at the beginning. So with that said, let's jump right into this week's podcast and learn all about Profinet. I wanna welcome to the show, Tom from Profibus,

Shawn Tierney meets up with Aaron Moncur of Pipeline Design and Engineering to discuss "The Most Underrated Skill in Automation," as well as the upcoming Product Design Expo, and the "Being An Engineer" podcast, all in this episode of The Automation Podcast. For any links related to this episode, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Listen to The Automation Podcast from The Automation Blog: The Automation Podcast, Episode 243 Show Notes: Special thanks to Pipeline for sponsoring this episode so we could release it ad free on all platforms! To learn more about Pipeline, the PDExpo, and Aaron's Podcast, see the below links: PDX: Product Design Expo, Registration Link (use coupon IIA50 to save $50!) Being An Engineer podcast The Wave (engineering community website) Aaron's LinkedIn profile Pipeline company website Read the transcript on The Automation Blog: (automatically generated) Shawn Tierney (Host): Hey, everybody. Thank you for tuning back in to the automation podcast. This week, I meet up with Aaron Moncur from Pipeline Design and Engineering to talk about what he thinks is the most important skill to have in industrial automation. And we also talk about his upcoming event, PDX, which is, coming up just in a few weeks, and we even have a coupon if you wanna go to save you $50 off the admission price. And we also talk about his podcast. He has over 300 interviews with engineers from all kinds of backgrounds, and, I think you guys will find that interesting as well. And, we just had a great time just talking and chatting about different strategies and different challenges we've had over the years in the automation world. So with that said, let's go ahead and jump right into our interview with Aaron Moncur of Pipeline Design and Engineering. I wanna welcome to the show for the first time, Aaron. And, we have a very exciting topic to talk about today. Should be very interesting to all you controls engineers and you high end electricians and technicians out there do automation. But, before we jump into the discussion, Aaron, please, tell the people a little bit about yourself. Aaron Moncur (Pipeline): Alright. Well, Shawn, thank you so much for the introduction and having me on the podcast. I've been excited to talk with you. I have my own podcast as well, actually. I'll I'll touch on that a little bit, but, I love talking about engineering and, business and automation. My company, Pipeline Design and Engineering, we've been around for about fifteen years now, and our focus is, industrial automation. We're integrators. We also do a lot of, just test fixtures, you know, smaller, not necessarily automated, but manual fixtures, things like that, machine building. We even do we actually started fifteen years ago in in general, product design. And so we did a lot of medical device design, consumer products, things like that. And then about three, four years in, one of our customers asked us if we could design a test fixture for them. And we said, what's a test fixture? Yes. And so, we figured out, you know, what that was all about and delivered it and they really liked it. And they said, this is great. We need more of this kind of thing. And so ever since then, slowly but surely, we we've, been moving more and more into that area of, like, fixtures. And then at some point, we started adding a little bit of motion, a motor, and a pneumatic actuator. And then at some point, we started doing full automation. And and at this point, that's that's kind of our focus is automation machine building, and we still do test fixtures and, a little bit of of product design as well. But I I have a degree in mechanical engineering, and I've been doing this, for a little over twenty years. Interesting story of getting laid off and then starting my company and,

Shawn Tierney meets up with Paul Scott of Inductive Automation to learn all about this year's Ignition Community Conference in this episode of The Automation Podcast. For any links related to this episode, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Listen to The Automation Podcast from The Automation Blog: Read the transcript on The Automation Blog: (automatically generated - coming soon) The Automation Podcast, Episode 242 Show Notes: Special thanks to Inductive Automation for sponsoring this episode so we could release it ad free on all platforms! To learn more about the Ignition Community Conference, see the below links: Ignition Community Conference Download Ignition Inductive University - Learn Ignition for free The Forum: Talk to the Ignition Community Schedule An Ignition Demo Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

Shawn Tierney meets up with Eugenio Silva of Emerson to learn all about Dust Collection Systems, and Emerson's Monitoring and Control Solution in this episode of The Automation Podcast. For any links related to this episode, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Note: This episode was not sponsored so the video edition is a "member only" perk. The below audio edition (also available on major podcasting platforms) is available to the public and supported by ads. To learn more about our membership/supporter options and benefits, click here. Listen to The Automation Podcast from The Automation Blog: The Automation Podcast, Episode 241 Show Notes: To learn about becoming a member and unlocking hundreds of our "member's only" videos, click here. Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

Shawn Tierney meets up with Jackie Stokes of Siemens to learn how to commission VFDs using StartDrive in this episode of The Automation Podcast. For any links related to this episode, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Listen to The Automation Podcast from The Automation Blog: Read the transcript on The Automation Blog: (automatically generated) ...coming soon The Automation Podcast, Episode 240 Show Notes: Special thanks to Jackie for coming back on the show, and to Siemens for sponsoring this episode so we could release it Ad Free! Below you'll find the timestamps Shawn mentioned in the intro, and helpful links Jackie provided: Timestamps G120: 9:39, 14:59 G220: 28:09 Ethernet/IP: 43:41 Free Training: 47:59 Siemens VFD Links: SINAMICS StartDrive (within TIA Portal) for easy commissioning SINAMICS Low Voltage Drives website Resources for SINAMICS VFDs on EIP and integration with Allen-Bradley PLCs Resources for SINAMICS VFDs and High Performance drives Get started with TIA Portal. Free, one-day, virtual, instructor-led course Know Studio 5000 but not TIA Portal? Free, one-day, virtual, instructor-led course will guide you through TIA Portal, putting terms and practices into a familiar context Siemens documentation, technical support Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

Shawn Tierney meets up with Winston Leung of QNX to discuss Trends in Robotics in this episode of The Automation Podcast. For any links related to this episode, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Note: As mentioned above, this episode was not sponsored so the video edition is a "member only" perk. The below audio edition (also available on major podcasting platforms) is available to the public and supported by ads. To learn more about our membership/supporter options and benefits, click here. Listen to The Automation Podcast from The Automation Blog: The Automation Podcast, Episode 239 Show Notes: To learn about becoming a member and unlocking hundreds of our "member's only" videos, click here. Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

Shawn Tierney meets up with Rylan Pyciak of Cleveland Automation Systems to discuss Trends in Automation, Inspiring a New Generation of Controls Engineers, and more in this episode of The Automation Podcast. For any links related to this episode, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Listen to The Automation Podcast from The Automation Blog: The Automation Podcast, Episode 238 Show Notes: Special thanks to Rylan for coming on the show, and to Cleveland Automation Systems for sponsoring this episode so we could release this episode Ad Free! Below you'll find links to Rylan's LinkedIn profile, and to Cleveland Automation Systems: Rylan Pyciak's LinkedIn Cleveland Automation Systems Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

Shawn Tierney meets up with Kelly Passineau of Rockwell Automation to learn about their new Ethernet/IP In-Cabinet solution for networking motor starters, buttons, and indicators in this episode of The Automation Podcast. For any links related to this episode, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Listen to The Automation Podcast from The Automation Blog: The "After Show" for Members: Additional Thoughts & Comments Note: As The Automation Show "After Show" is a member/supporter only perk, the above video is not accessible to non-members. Learn more about our membership options here. The Automation Podcast, Episode 237 Show Notes: Special thanks to Kelly for coming on the show, and to Rockwell Automation for sponsoring this episode so we could release this episode Ad Free! Below you'll find links to more information about their Ethernet/IP In-Cabinet solution: Product Website eBook/Brochure User Manual Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

This week I meet up with Collin Morris of MaintainX to learn about their CMS solution for preventing unplanned machine downtime in this episode of The Automation Podcast. For any links related to this episode, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Listen to The Automation Podcast from The Automation Blog: The Automation Podcast, Episode 236 Show Notes: Special thanks to Collin for coming on the show, and to Maintain for sponsoring this episode so we could release it Ad Free! Below you'll find links to more information about MaintainX: MaintainX overview MaintainX CoPilot Reporting overview Customer case studies Implementation overview Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

This week I meet up with Kyle Van Eenennaam of Inductive Automation to learn how to use Ignition in this episode of The Automation Podcast. Note: As this episode was not sponsored, the video edition is only available to our members on The Automation Blog and on YouTube. For more information, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Note: As mentioned above, this episode was not sponsored so the video edition is a "member only" perk. The below audio edition (also available on major podcasting platforms) is available to the public and supported by ads. To learn more about our membership/supporter options and benefits, click here. Listen to The Automation Podcast from The Automation Blog: The Automation Podcast, Episode 235 Show Notes: Special thanks to Kyle for coming on the show, and to our members for making this episode possible! To learn more about becoming a member, click here. Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

This week I meet up with Liz Prosak and Dennis Wylie of Rockwell Automation to learn what's new and next about Logix, including what's new with the 5590 L9 Controller, all in this episode of The Automation Podcast. For any links related to this episode, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Member's Only Extended "RAW" Edition: Listen to The Automation Podcast from The Automation Blog: The Automation Podcast, Episode 234 Show Notes: Special thanks to Liz and Dennis for coming on the show, and to Rockwell Automation for sponsoring this episode so we could release it Ad Free! Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

This week I cover the results from our 2024 Audience Choice Polls, recapping what industrial automation vendors our audience picked as their top choices in this episode of The Automation Podcast. Note: As this episode was not sponsored, the video edition is available to members only. For more information, check out the Show Notes below. The Automation Podcast, Episode 233 Show Notes: Special thanks to everyone who voted in our 2024 Audience Choice Polls! To unlock our extensive automation how-to library, become a member starting at just $5 per month. Visit TheAutomationBlog.com/Join to learn more. Link to the 2024 poll results: TheAutomationBlog.com/2024-audience-choice-polls/ Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.

This week I meet up with Zack Steck of Pepperl+Fuchs to learn about their latest Position Guided Vision product in this episode of The Automation Podcast. Note: As this episode was not sponsored, the video edition is only available to our members here on The Automation Blog and on YouTube. For more information, check out the "Show Notes" located below the video. Watch The Automation Podcast from The Automation Blog: Note: As mentioned above, this episode was not sponsored so the video edition is a "member only" perk. The below audio edition (also available on major podcasting platforms) is available to the public and supported by ads. To learn more about our membership/supporter options and benefits, click here. Listen to The Automation Podcast from The Automation Blog: The Automation Podcast, Episode 232 Show Notes: Special thanks to our members for making this show possible! To learn more about becoming a member, click here. Links mention in the show can be found below: 2024 Podcast Audience Choice Poll 2024 Audience Choice Awards - Select Your Preferred Vendors! Until next time, Peace ✌️ If you enjoy this episode please give it a Like, and consider Sharing as this is the best way for us to find new guests to come on the show. Shawn M TierneyTechnology Enthusiast & Content Creator Eliminate commercials and gain access to my weekly full length hands-on, news, and Q&A sessions by becoming a member at The Automation Blog or on YouTube. You'll also find all of my affordable PLC, HMI, and SCADA courses at TheAutomationSchool.com.