Home Style Green

This week I attended a BRANZ seminar titled 'Building for our changing climate'. Tāmaki Makaurau Auckland was the last stop on the BRANZ seminar tour of the country and it's encouraging to think that rooms of designers, builders, product suppliers, building officials and others, were interested enough in this topic to take four hours out of their week. A key takeaway is that we're not prepared. We're already handicapped by having insufficient standards in our building code to deal with our current climate. With the forecast being 'warmer and wetter', the situation is set to get worse. https://homestylegreen.com/?p=5936

Steve Penny is the founder and director at Honoris, a building services consultancy in Christchurch, New Zealand. He is also the host of his own podcast, A Penny for Your Thoughts.

Many people might be surprised to know that the New Zealand Building Code does not require any consideration of overheating in homes. The energy efficiency requirements in our code are based only on the ability of buildings to keep warm without excessive heat loss. There is nothing to prevent homes from being designed with large areas of unshaded north or west-facing glass. Siân Taylor is an Architect and Passive House Designer based in Queenstown. She has experience creating homes that are designed to perform well all year round, in some of the most challenging and spectacular locations. Follow Siân on Instagram and check out Team Green Architect's latest work at https://www.teamgreenarchitects.co.nz/.

Stärke has been in the window industry in New Zealand since the 80s. They were at the forefront of supplying aluminium frames to the building industry but have recently made some big changes. With a focus on building performance, Benjy Simmons describes the new direction of Stärke as a 'once-in-fifty-year' change. While the company has a long legacy, they've experienced rapid change over the last few years. Benjy credits some of the openness to change to him being from outside the industry. He's come in with a different perspective. "We're beginning to see ourselves as a building performance company not just a window and door company", says Benjy. Check out the full range of Stärke products along with their education pages and other resources.

More is not always better, especially regarding the amount of timber in the frame of a house. The more timber there is, the less space there is for insulation. The way this is measured is called timber fraction. Most homes in Aotearoa are designed using the assumption that timber will make up around 14% - 18% of the area in a wall. A 2020 BRANZ research study found that in reality, the average timber fraction is closer to 40%. This means there is considerably less space available for insulation. Unfortunately, this is not always picked up during the consenting or pre-lining inspection process. H1 Energy Efficiency calculations are checked at the design stage, usually using the much lower default timber fraction assumption. The result of all this is that many consumers are effectively getting less insulation than they're paying for, and much more thermal bridging. PlaceMakers has recently launched a new service providing a detailed report of the actual timber content for any wall frame and roof truss they supply. This accurate figure can then be used to provide true H1 calculations. Alternatively, a designer might choose to adapt their plan to reduce the thermal bridging and increase the amount of insulation. National Technical Resource Manager, Pete Hammond explains how Framology works. We also discuss the option of using external insulating products like RigidRAP-XT from IBS to eliminate thermal bridges.

Denise Martin has been involved with many of Aotearoa's Passive House projects. As one of the most experienced blower door testers in the country, she's been involved with verifying a range of residential and commercial buildings both in New Zealand and Australia. I caught up with Denise to chat about how she got into building science in the first place and some of the challenges and opportunities facing the building sector in New Zealand. We also discuss the building code, energy modelling, thermal performance and air tightness. If you don't already, I highly recommend following Denise on Instagram, TikTok and LinkedIn.

I found it confronting listening to Tova O'Brien's guest this past week as she described the experiences of staying in motel emergency accommodation with a young daughter. From my relative privilege (of choosing the right parents and having things turn out ok for me so far), I find it hard to imagine being in this situation. But it's the reality for nearly 6,500 people across Aotearoa, half of whom are children. This is an emergency, and the problem is complex. The solution will require more than simply building more houses because the underlying issues are more complex than that. Related to this is a proposal from the Ministry of Business Innovation and Employment (MBIE) to review the building consent process in New Zealand. This is something I'd like to look at in more detail because we must get the balance right. In 2023, MBIE sought public submissions in response to an options paper on a review of the building consent system. This week MBIE published a summary of the 270 submissions received. At the other end of the spectrum, I caught up with Jonathan Holmes about living in a Certified Passive House Premium home and working on assessing the embodied carbon in our buildings. Other links for this week's podcast episode: Jonathan Holmes on LinkedInHolmes House, Sustainable EngineeringHawea Flat, Home Style Green Be sure to register for Reimagine Buildings '24

Last week, February 22nd rolled around. This was a significant date in the Cutler-Welsh household thirteen years ago when our house was located close to the Avon River in Christchurch. While it was a life-changing day for us, life has gone on. We ultimately lost our recently renovated home in Richmond as a result of the Canterbury Earthquakes, but many lost so much more. What would a moratorium on consenting new buildings in known floodplains, tsunami or fire risk areas, look like? How would the resulting plummet in land values impact the economy and further inflate the cost of housing? But if not now, when? The risks are likely to get higher and ultimately we have to ask ourselves if we're prepared to keep making our stop-banks higher or retreat to higher, less shaky ground.

There are fundamental gaps in what the New Zealand Building Code covers and how well it covers the aspects that are included. These reasons should be enough to justify using standards like Passive House or Homestar to go above and beyond the building code. In this series, I'll be looking at reasons why it's better to ask about the value and risk minisation resulting from higher performance standards rather than focussing only on perceived upfront cost.

As I draft this episode, there's a chorus of cicadas outside my window. The sun is shining and there's a faint breath of a breeze. It seems calm where I live, here in a relatively leafy part of Tāmaki Makaurau. But all is not calm everywhere in Aotearoa today, Waitangi Day 2024.

There are not many new ideas in the building industry. The basic concepts have been around for a while. 'High-performance' products and design details that might be described as 'innovative' here in New Zealand are likely to be standard practice somewhere else. With building his experience in Europe and Scandanavia Richard Eden is well placed to help New Zealand builders do things better. He can often be found teaching builders around the country how to do a good quality install of good quality windows.

Brad Wills is Director: Strategic Customers & Programs at Schneider Electric. Based in Tennessee, he has three decades of experience with the organisation. We discuss the diverse range of products and services now offered by Schneider as well as the exciting opportunities for smart metering, microgrids, onsite battery storage and more.

In 2007 when Kim Feldborg arrived in New Zealand he was surprised at how cold and inefficient the houses were, despite growing up in much colder European climates. Originally from Denmark, Kim has built houses in Greenland, Norway, Germany and England. He now enjoys life in a Certifed Passive House he built himself in Taupō.

Growing up in a typical kiwi home, it wasn't until he had lived in the UK for a bit that Damien McGill realised we don't need to be suffering through winter in cold, damp houses. Damien is an engineer and knows how things should be put together so they don't fall apart. But he's interested in more than that. In this chat, Simon Cator and I discuss how Damien got into the Superhome Movement. We also review his experience working on his own 'Super-Reno'.

Richard Houghton now lives in a very good, healthy home. But that wasn't always the case. Along with Simon Cator from Pro Clima NZ, we discuss Richard's journey in designing and building an energy-efficient SIP home just outside Auckland, New Zealand.

Bert Sarkkinen has built a successful timber framing company around a solid philosophy grounded in the style and craftsmanship of a unique and timeless form of building. Bert appeared on the Home Style Green podcast back in episode 176. A couple of years on, Arrow Timber Framing has expanded into a larger facility and Bert has recently released the second edition of his book, The Art of Hybrid Timber Framing.

Zola Rose has a vision for regenerative housing as a solution for improving communities and sustainability. She brings diverse and international experience to Aotearoa New Zealand where she now calls Nelson her home. Real estate has long been used as an investment and a means of making a profit in New Zealand. Zola explains how this has tended to undermine the values that we should otherwise associate with where we live. Housing should protect, shelter and foster community, but we've tended towards the commoditisation of housing. There are solutions that can help provide better housing and helping people implement these solutions is the basis for Zola's social enterprise. https://www.commonground.net.nz

Mariano Croce is an Argentine entrepreneur who relocated into Queenstown with his young family just before the first COVID lockdown in 2020. He has a background in prefabrication, having co-founded a modular building company in Argentina when he was 24. More than 15 years on, Mariano has created Modulo.nz to provide architecturally designed, high-performance, modular homes built in New Zealand.

Darren O'Dea is a self-confessed building physics nerd. Along with co-founder David Carroll, he has helped to create Speckel, a platform for designing low carbon, healthier, durable and energy-efficient buildings. Having proven popular with architects and consultants in Australia, Speckel is now available in New Zealand. Find out more at https://www.speckel.io/

Sabine Schoenberg is co-founder of the Smart Healthy Green Living network, a collection of videos and streaming content on everything from tiny homes and carpentry to interior design and gardening. Through her network, Sabine is promoting the 'Do One Thing' campaign to help everyone take a step towards living a more sustainable life.