Hackaday Podcast

This week, it was Kristina's turn in the hot seat with Editor-in-Chief Elliot Williams. First up in the news -- the results are in for the 2024 Home Sweet Home Automation contest! First and second place went to some really gnarly, well-documented hacks, and third went to the cutest pill-dispensing robot you'll probably see before you hit the retirement home. Which was your favorite? Let us know in the comments. Then it's on to What's That Sound. Kristina failed once again, but you will probably fare differently. Can you get it? Can you figure it out? Can you guess what's making that sound? If you can, and your number comes up, you get a special Hackaday Podcast t-shirt. Then it's on to the hacks, beginning with a DIY cell phone sniffer and a pen that changed the world. Then we talk bullet time on a budget, the beautiful marriage of 3D printing and LEGO, and, oh yes, flexure whegs. Finally, we get the lowdown on extender probes, and posit why it's hard to set up time zones on the Moon, relatively speaking. Check out the links over at Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!

Elliot and Dan got together to enshrine the week's hacks in podcast form, and to commiserate about their respective moms, each of whom recently fell victim to phishing attacks. It's not easy being ad hoc tech support sometimes, and as Elliot says, when someone is on the phone telling you that you've been hacked, he's the hacker. Moving on to the hacks, we took a look at a hacking roadmap for a cheap ham radio, felt the burn of AM broadcasts, and learned how to program old-school EPROMs on the cheap. We talked about why having a smart TV in your house might not be so smart, especially for Windows users, and were properly shocked by just how bad wireless charging really is. Also, cheap wind turbines turn out to be terrible, barnacles might give a clue to the whereabouts of MH370, and infosec can really make use of cheap microcontrollers. Head on over to Hackaday to check out the links or leave us comments!

What were some of the best posts on Hackaday last week? Elliot Williams and Al Williams decided there were too many to choose from, but they did take a sampling of the ones that caught their attention. This week's picks were an eclectic mix of everything from metal casting and plasma cutters to radio astronomy and space telescope budgets. In between? Some basic circuit design, 3D printing, games, dogs, and software tools. Sound confusing? It won't be after you listen to this week's podcast. Check out the links on Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!

Before Elliot Williams jumps on a train for Hackaday Europe, there was just enough time to meet up virtually with Tom Nardi to discuss their favorite hacks and stories from the previous week. This episode's topics include the potential benefits of having a dual-gantry 3D printer, using microcontrollers to build bespoke note taking gadgets, the exciting world of rock tumbling, and the proper care and maintenance required to keep your World War II battleship in shape. They'll also go over some old school keyboard technologies, DIP chip repairs, and documenting celestial events with your home solar array. By the end you'll hear about the real-world challenges of putting artificial intelligence to work, and how you can safely put high-power lithium batteries to work in your projects without setting your house on fire. Check out the links over on Hackaday if you want to follow along, and as always, tell us what you think in the comments!

This week, Editor-in-Chief Elliot Williams and Kristina Panos convened once again to give the lowdown on this week's best hacks. First up in the news -- it's giga-sunset time for Gigaset IoT devices, which simultaneously became paperweights on March 29th. And all that Flipper Zero panic? It has spread to Australia, but still remains exactly that: panic. Then it's on to What's That Sound. Kristina failed again, although she was in the right neighborhood. Can you get it? Can you figure it out? Can you guess what's making that sound? If you can, and your number comes up, you get a special Hackaday Podcast t-shirt. Then it's on to the hacks, beginning with the terrifying news of an xz backdoor. From there, we marvel at a 1980s 'butler in a box' -- a voice-activated home automation system -- and at the idea of LoRa transmissions without a radio. Finally, we discuss why you don't want to piss off Trekkies, and whether AI has any place in tech support. Check out the links on Hackaday to follow along, and as always, tell us what you think about this episode in the comments!

It was Dan's turn behind the mic with Elliot this time as we uncovered the latest from the world of hacking, and what an eclectic mix it was. It was slightly heavy on machining, with a look at mini-mills that are better than nothing, and a DIY DRO that's A-OK. We also kicked the nostalgia bucket over -- whatever that means -- and got a new twist on the old "65-in-1" concept, found hidden code in 80s music, and looked at color TV in the US and how it got that way. We've got ample alliteration about grep, thoughts about telling time on the Moon, and what does Canada have against the poor Flipper Zero, anyway? Head on over to Hackaday for all the linky-links.

No need to wonder what stories Hackaday Editors Elliot Williams and Al Williams were reading this week. They'll tell you about them in this week's podcast. The guys revisit the McDonald's ice cream machine issue to start. This week, DIY voice assistants and home automation took center stage. But you'll also hear about AI chat models implemented as a spreadsheet, an old-school RC controller, and more. How many parts does it take to make a radio? Not a crystal radio, a software-defined one. Less than you might think. Of course, you'll also need an antenna, and you can make one from lawn chair webbing. In the can't miss articles, you'll hear about the problems with the x86 architecture and how they tried to find Martian radio broadcasts in the 1920s. Miss any this week? Check out the links to follow along, and as always, leave you comments!

Join Hackaday Editors Elliot Williams and Tom Nardi as they go over their favorite hacks and stories from the past week. This episode starts off with an update on Hackaday Europe 2024, which is now less than a month away, and from there dives into wheelchairs with subscription plans, using classic woodworking techniques to improve your 3D printer’s slicer, and a compendium of building systems. You’ll hear about tools for finding patterns in hex dumps, a lusciously documented gadget for sniffing utility meters, a rare connector that works with both HDMI and DisplayPort, and a low-stress shortwave radio kit with an eye-watering price tag. Finally, they’ll take a close look at a pair of articles that promise to up your KiCAD game. Check out the links on Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!

This week, Editor-in-Chief Elliot Williams and Kristina Panos met up in a new disposable location to give the lowdown on this week's best hacks. First up in the news -- the Home Sweet Home Automation contest is still going strong. You've still got plenty of time, so get on over to Hackaday.IO and start your entry today. In the news, the UK is asking how powerful an electric bike should be (more than 250 Watts, certainly), and legal pressure from Nintendo has shut down two emulators. Then it's on to What's That Sound. Kristina failed again, although she was pretty confident about her answer. Can you get it? Can you figure it out? Can you guess what's making that sound this week? If you can, and your number comes up, you get a special Hackaday Podcast t-shirt. But then it's on to the hacks, beginning with a Wi-Fi toothbrush hack from [Aaron Christophel]. This can only mean the beginning of some epic toothbrush firmware, right? From there, we marvel at moving cat food, the ultimate bulk material, and the idea of spoofing a whole cloud of drones. Finally, we examine one of Jenny's Daily Drivers in the form of Damn Small Linux (the other DSL), and reminisce about dial-up (speaking of DSL). Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

It's a leap year, so Elliot and Dan put the extra day to good use tracking down all the hottest hacks from the past week and dorking out about them. There's big news in the KiCad community, and we talked about all the new features along with some old woes. Great minds think alike, apparently, since two different e-ink weather stations made the cut this week, as did a floating oscilloscope, an automated film-developing tank, and some DIY solar panels. We talked about a hacker who figured out that water makes a pretty good solar storage medium, and it's cheaper than lithium, another who knows that a crappy lathe is better than no lathe, and what every hacker should know about Ethernet. Is there a future for room-temperature superconductors? Maybe it just depends on how cold the room is. Check out the links over on Hackaday.

Hackaday Editors Elliot Williams and Al Williams sat down to compare notes on their favorite Hackaday posts of the week. You can listen in on this week's podcast. The guys talked about the latest Hackaday contest and plans for Hackaday Europe. Plus, there's a what's that sound to try. Your guess can't be worse than Al's, so take a shot. You could win a limited-edition T-shirt. In technical articles, Elliot spent the week reading about brushless motor design, twin-t oscillators, and a truly wondrous hack to reverse map a Nintendo Switch PCB. Al was more nostalgic, looking at the 555 and an old Radio Shack kit renewed. He also talked about a method to use SQL to retrieve information from Web APIs. Quick hacks were a decided mix with everything from homemade potentiometers to waterproof 3D printing. Finally, the guys talked about Hackaday originals. Why don't we teach teens to drive with simulators? And why would you want to run CP/M -- the decades-old operating system -- under Linux?

Hackaday Editors Elliot Williams and Tom Nardi discuss all the week's best and most interesting hacks and stories, starting with Canada's misguided ban on the Flipper Zero for being too spooky. From there they'll look at the state-of-the-art in the sub-$100 3D printer category, Apple's latest "Right to Repair" loophole, running UNIX on the NES (and how it's different from Japan's Famicom), and the latency of various wireless protocols. After singing the praises of the new Bus Pirate 5, discussion moves on to embedded Linux on spacecraft, artfully lifting IC pins, and the saga of the blue LED. Finally you'll hear the how and why behind electrical steel, and marvel at a Mach 10 missile that (luckily) never needed to be used. Head on over to Hackaday and check out the links!

Last week, we held an Episode 256 celebration round-table, but Kristina and I also met afterwards to talk about all the week's hacks. That part didn't fit, but we didn't want to deprive you of your weekly hack fix either, so here they are!

For this week's episode, we did something super special -- we all convened to answer your burning questions about your hosts, both as hackers and as humans. We kick things off with a segment featuring a hearty round-table discussion between Elliot, Al, Dan, Kristina, and Tom. What's on our benches? What do we type on? Go find out! None of us figured out What's That Sound though a few of us had some creative guesses. Can you guess the sound? There could be a t-shirt in it for ya. Kristina and Elliot went on to have a normal podcast too, but since the round table section went so long, we'll process up that section and put it out early next week. Stay tuned!

This week, Dan joined Elliot for a review of the best and brightest hacks of the week in Episode 0xFF, which both of us found unreasonably exciting; it's a little like the base-2 equivalent of watching the odometer flip over to 99,999. If you know, you know. We had quite a bumper crop of coolness this week, which strangely included two artifacts from ancient Rome: a nanotech goblet of colloidal gold and silver, and a perplexing dodecahedron that ends up having a very prosaic explanation -- probably. We talked about a weird antenna that also defies easy description, saw a mouse turned into the world's worst camera, and learned how 3D-printed signs are a whole lot easier than neon, and not half bad looking either. As always, we found time to talk about space, like the legacy of Ingenuity and whatever became of inflatable space habitats. Back on Earth, there's DIY flux, shorts that walk you up the mountain, and more about USB-C than you could ever want to know. And don't forget that to celebrate Episode 256 next week, we'll be doing a special AMA segment where we'll get all the regular podcast crew together to answer your questions about life, the universe, and everything. If you've got a burning question for Elliot, Tom, Kristina, Al, or Dan, put it down in the comment section and we'll do our best to extinguish it.

This week Hackaday Editors Elliot Williams and Al Williams chew the fat about the Haier IOT problem, and all other top Hackaday stories of the week. Want to prove your prowess at C programming? Take a quiz! Or marvel at some hairy display reverse engineering or 3D-printed compressor screws. On the lighter side, there's an immense water rocket. After Al waxes nostalgic about the world of DOS Extenders and extended memory, the guys talk about detective work: First detecting AI-written material, and finally, a great detective story about using science to finally (maybe) crack the infamous DB Cooper hijacking case. Follow along with the links over at Hackaday. Don't forget to tell us what you think about this episode in the comments!

This week Hackaday Editors Elliot Williams and Tom Nardi start things off with a traffic report from the Moon, which has suddenly become a popular destination for wayward robots. [caption id="attachment_657278" align="alignright" width="300"] Anonymizing an ATtiny85 via laser[/caption] From there, they'll go over a fire-tending contraption that's equal parts madness and brilliance, two decades of routers being liberated by OpenWRT, impressive feats of chip decapping, and USB-C's glorious rise to power. You'll also hear about the latest developments in laptop RAM, exploits against the flash encryption used on the ESP32, and Android powered oscilloscopes. The duo will wrap things up with horror stories from the self-checkout aisle, and a look at the fantastical rolling power station that Dan Maloney has been building in his driveway. Check out the links over at Hackaday, and as always, tell us what you think about this episode in the comments!

This week, Editor-in-Chief Elliot Williams and Kristina Panos met up to discuss the best hacks of the previous week. It's CES time once again in Las Vegas, and you know what that means -- some wacky technologies like this AI pet door that rejects dead mice. Then it's on to What's That Sound, which Kristina managed to nail for once. Can you get it? Can you figure it out? Can you guess what's making that sound this week? If you can, and your number comes up, you get a special Hackaday Podcast t-shirt. But then it's on to the hacks, beginning with a new keyboard from [Joe Scotto] and an exploration of all you can do with an LED strip, like 1D fireworks and roller coasters without any moving parts. From there, we marvel at the ability of sound waves to extinguish flames, and the tech behind life as a quadriplegic. Finally, we examine not one, but two of Jenny List's finely-crafted rants, one about web browsers, and the other about the responsible use of new technology. Check out the links over at Hackaday if you want to follow along, and as always, tell us what you think about this episode in the comments!

Welcome to 2024! This time around, Elliot and Dan ring in a new year of awesome hacks with quite an eclectic mix. We kick things off with a Pluto pity party and find out why the tiny ex-planet deserved what it got. What do you do if you need to rename a bunch of image files? You rope a local large-language model in for the job, of course. We'll take a look at how pinball machines did their thing before computers came along, take a fractal dive into video feedback, and localize fireworks with a fleet of Raspberry Pi listening stations. Ever wonder what makes a GPS receiver tick? The best way to find out might be to build one from scratch. Looking for some adventure? A ride on an electroluminescent surfboard might do, or perhaps a DIY "Vomit Comet" trip would be more your style. And make sure you stick around for our discussion on attempts to optimize surgery efficiency, and our look back at 2023's top trends in the hardware world. Check out all the links over at Hackaday!

This week in the Podcast, Elliot Williams is off at Chaos Communication Congress, hearing tales of incredible reverse engineering that got locomotives back up and running, while Al Williams is thinking over what happened in 2023. There’s a lot of “how things work” in this show, from data buoys to sewing machines to the simulated aging of ICs. Whether you’re into stacking bricks, stacking Pi Picos, or stacking your 3D prints to make better use of precious bed space, this episode is for you. Enjoy. And as always, check out the links over at Hackaday, and let us know what you think in the comments!